Men’s Boots

GEORGIA ATHENS WATERPROOF WORK BOOT G7403

Georgia Athens Waterproof Work Shoe gives you extreme comfort and stability while keeping feet dry.

Part of the Athens Collection, this shoe features Anchor Disk Technology to anchor your foot in comfort and stability. The TPU stabilizer with built-in shank is layered between materials to absorb shock and provide additional support and comfort in the areas that need it most.

Added comfort comes from the Georgia Boot’s AMP™ (advanced memory polyurethane) insole. It’s a unique dual layer of polyurethane on the bottom layer for maximum cushioning and a memory foam top layer to ensure the boot’s insole is custom molded to your foot.

Built with the Georgia Waterproof System, this shoe stands up to rain and mud. Air gets in, but water can’t. There’s a 100 percent guarantee that your feet stay dry.

The rubber outsole resists chemicals, oils and slips while remaining flexible and cushioning.

Made of soft, waterproof brown leather, this 6″ lace-up, moc-toe has a padded collar and tongue.

SHOP LOCAL


GEORGIA BOOT ATHENS WATERPROOF WORK BOOT G9453

The Georgia Athens Waterproof Work Boot is an 8-inch, soft leather, lace-up boot that you’ll wear all day.

Part of the Athens Collection, it features the Georgia Boot Waterproof System to keep your feet dry. Georgia Boot offers a 100 percent guarantee.

The Athens collection offers both comfort and stability. Anchor Disk Technology by Georgia Boot® includes a TPU stabilizer with a built-in shank that absorbs shock and provides additional support and comfort in the areas that need it most.

Georgia Boot’s AMP™ (advanced memory polyurethane) insole is a unique dual layer of polyurethane on the bottom layer for maximum cushioning and a memory foam top layer to ensure the boot’s insole is custom molded to your foot.

Additional touches of comfort come from the EVA midsole, padded collar and padded tongue.

This boot’s rubber outsole resists chemicals, oil and slips. It’s a non-marking sole that remains flexible and resists abrasions. So, just work “” no need to worry about where you walk.

SHOP LOCAL


GEORGIA BOOT ATHENS CHELSEA WATERPROOF WORK BOOT GB00156

Combining comfort and rugged features, the Athens collection has long been one of Georgia Boot’s most popular collections. This men’s Chelsea boot’s upper is made from a supple full-grain leather and also includes elastic twin gores. The twin gores make the boot easy to slip on and take off. If you work in environments where rain or water is prevalent, these boots have you covered. The Georgia waterproof system is 100% guaranteed to keep you dry. Also included is a mesh moisture wicking lining that wicks away sweat throughout the day.

If you are looking for comfort, look no further than these boots. Comfort is provided by the polyurethane AMP LT insole. Polyurethane insoles are thicker than conventional insoles and the AMP LT has the added benefit of being topped with memory foam. Memory foam conforms to the shape of your foot and cushions each step.

This Athens boot uses our proprietary TPU Anchor Disk shank. The Anchor Disk is much wider than traditional steel shanks and will protect more of the underside of your foot. This men’s Chelsea boot has been built with a combined cement and stitchdown construction. This construction is extremely durable because the outsole is still stitched to the upper; it is also still pretty flexible because part of the outsole is attached with cement construction. For those who need an outsole that performs, this rubber outsole is also both oil and slip-resistant.

Shop Local 


GEORGIA BOOT RUMBLER 8INCH COMPOSITE TOE WATERPROOF WORK BOOT GB00285

Fight through all the bumps in the road with the 8″ Georgia Boot Rumbler composite toe waterproof work boot!

The upper on this safety work boot is constructed from full- grain leather and features combination eyelet or hook hardware and an external TPU toe cap for added abrasion resistance and durability. The tongue and collar are padded for extra comfort. The removable leather Comfort Cover prevents pinch points while providing protection.

The inside of this composite toe work boot in lined in with high performance mesh and is equipped with our guaranteed Georgia Waterproof System. Your feet will not only stay dry, but feel the ultimate comfort provided by the AMP LT memory foam insole.

The composite toe cap is Ergo-Fit which means shaped to match the contours of your foot, allowing more wiggle room for your toes. It meets the standards for ASTM F2413 protective toe classification. Additionally this boot meets the ASTM F2413 classification for electrical hazard footwear.

 

Shop Local 


GEORGIA BOOT ATHENS WATERPROOF SIDE-ZIP BOOT GB00245

A classic Georgia Boot work collection with an upland twist. This Georgia Boot Athens waterproof boot features premium full-grain leather with a waxed canvas upper and a side zipper for easy on and off.

The inside of this moc-toe boot is lined in high performance mesh and contains a removable ultra-cushioning AMP footbed. This boot is also equipped with the Georgia Waterproof System. It is designed to prevent water from seeping into your boot when worn in wet conditions while remaining breathable.

Joined to the upper through a combined cement and stitch construction, the Athens outsole is made up of multiple layers to give you ultimate support and durability. An EVA midsole cushions and absorbs shock with each step. The Anchor Disk, consisting of a TPU stabilizer and built in shank, provides additional shock absorption and support where you need it most. Finally, the rubber outsole gives it great oil, slip and abrasion resistance.

Whether you’re looking for a great boot for bird hunting, to wear casually, or to work in, you can bet on logging many miles in these Georgias!

Shop Local


GEORGIA BOOT AMP LT WEDGE WATERPROOF WORK BOOT GB00350

The Georgia Boot Wedge Waterproof Work Boot takes comfort and durability to the next level.

The upper on this 6″ waterproof wedge lace-up work boot features our premium SPR leather. It’s three times as strong and two and a half times more abrasion resistant compared to traditional leathers. It resists caustic alkalis and other barnyard acids. Additional features on the upper include dual functioning hardware, the heel stabilizing Counter Lock System and a padded tongue and collar.

The interior is lined in mesh and is equipped with the Georgia Waterproof system, guaranteed to keep your feet dry when working in wet conditions. A padded counter pocket gives your heel added support. Also inside is the removable AMP LT insole. A layer of polyurethane topped with memory foam to keep your feet cradled in all day comfort.

The foundation of this wedge work boot starts with a fiberglass shank for added support and durability followed by a cushioning EVA midsole. The final layer is the outsole, comprised of our Carbo-Tec rubber, a proprietary blend that contains great slip, oil, chemical, abrasion and heat resisting properties.

Shop Local 


GEORGIA BOOT CARBO-TEC LT STEEL TOE WATERPROOF PULL-ON WORK BOOT GB00310

The Georgia Boot Carbo-Tec LT steel toe waterproof pull-on work boot is a lightweight Farm & Ranch boot built for tough job environments. The upper is constructed from full-grain SPR leather that is two times more abrasion resistant and three times stronger than traditional leathers. Leather pull tabs allow for easy on of the boot while the Counter Lock system acts as both a heel stabilizer and a protectant against kicking off your boot. The Ergo-fit steel toe cap is design to allow for more toe room without compromising protection.

The inside of this waterproof pull on work boot is equipped with high performance lining and the Georgia Waterproof System to keep your feet cool and dry. Also inside is a removable Quick Response polyurethane footbed that cushions and bounces back as you walk.

The dual density outsole features an EVA midsole and our proprietary rubber blend giving the boots great oil, slip, heat and abrasion resistance. It also includes a fiberglass shank for added stability. This boot meets the ASTM F2413 standards for protective toe and electrical hazard safety footwear.

Built with a Goodyear® welt construction, this steel toe pull-on is incredibly durable. There is no shortage of comfort or protection with the Carbo-

 

Shop Local


GEORGIA BOOT RUMBLER COMPOSITE TOE WATERPROOF PULL-ON WORK BOOT GB00286

Fight through all the bumps in the road with the Georgia Boot Rumbler composite toe waterproof pull-on work boot.

The upper on this 10″ pull-on boot is constructed from full- grain leather and features leather pull loops and an external TPU toe cap for added abrasion resistance and durability.

The inside of this composite toe work boot in lined in with high performance mesh and is equipped with our guaranteed Georgia Waterproof System. Your feet will not only stay dry, but feel the ultimate comfort provided by the AMP LT memory foam insole.

The composite toe cap is Ergo-Fit which means shaped to match the contours of your foot, allowing more wiggle room for your toes. It meets the standards for ASTM F2413 protective toe classification. Additionally this boot meets the ASTM F2413 classification for electrical hazard footwear.

The triple density outsole features an internal EVA midsole encapsulated in an external TPU heel stabilizer and rubber outsole. It’s not only slip and oil-resistant but has great heat and chemical resistant properties as well. It also includes a double ribbed steel shank for added stability and durability.

 

Shop Local


GEORGIA BOOT ATHENS PULL-ON STEEL TOE WORK BOOT GB00246

The Georgia Boot Athens Pull-On Steel Toe Work Boot features a full-grain leather unlined upper with a moc-toe design. Leather pull loops combined with a rear zipper make for an easy on and easy off experience.

The oil and slip resistant rubber outsole is joined to the upper through a ¾ stich out construction allowing for greater flexibility. It contains a cushioning EVA midsole and the Anchor Disk by Georgia with a built in TPU shank.

Inside is the removable Advanced Memory Polyurethane (AMP) insole. It’s a memory foam footbed that cradles your foot in all day comfort.

This Athens steel toe work boot meets the ASTM F2413 standards outlined for protective toe and electrical hazard safety footwear.

Shop Local 


GEORGIA BOOT WATERPROOF RUBBER BOOT GB00230

Georgia Boot Rubber provides waterproof protection so you can get the job done in the wettest of conditions. Equipped with the Georgia Waterproof System, this rubber boot is guaranteed to defend against water and muck that may try to penetrate your boots.

The upper consists of 5mm neoprene and has a stretch gusset with adjustable locking strap to provide a universal fit. You won’t mind being on your feet in this boot. The removable AMP LT insole provides extreme comfort as you walk. A cushioning layer of memory foam on a polyurethane base provides a customized fit. It also has perforated channels on the bottom to promote air circulation, keeping your feet cool.

The vulcanized rubber outsole is both slip and chemical resistant and has a fiberglass shank to provide additional support.

Shop Local


GEORGIA BOOT MARSHLAND UNISEX DUCK BOOT GB00274

The Georgia Boot 6″ Marshland duck boot is a classic utilitarian boot with premium performance features. The upper is constructed from full-grain SPR leather, far stronger and more abrasion resistant than traditional leathers. It has a mesh lining with cooling fibers to keep your feet a comfortable.

Perhaps one of the most key comfort features is the AMP LT insole. This removable footbed is made up of a layer of cushioning memory foam over a polyurethane base, cradling your feet in all day comfort.

The rubber shell is waterproof and joined to the oil and slip resistant rubber outsole through a vulcanized construction.

Whether you’re looking for a durable farm boot or just a great looking casual boot with supreme comfort, the Georgia Boot Marshland collection is a must try!

Shop Local 


GEORGIA BOOT MUDDOG WELLINGTON WORK BOOT G5514

These Georgia Boot® pull-on Muddog Comfort Core® work boots are durable and comfortable.

These wellington boots are made with only the toughest of materials, such as SPR™ leather.

Compared to traditional leather, SPR leather is roughly 3 times as strong and resists abrasions 2.5 times as well. It stands up to many chemicals and acids due to a rare blend of proprietary materials, making it a great choice for a ranch work, and many other harsh environments.

This men’s work boot has a rubber Phoenix outsole that’s designed to resist chemicals, oils,and slips. It’s non-marking and provides cushioning as you go about your work.

The comfortable boot has a Comfort Core® insole which features a heel plug for shock absorption and airflow channels promote breathing. A fiberglass shank provides arch support and steady footing.

For chemical-resistance and comfort, pull on these Georgia Boot Muddog work boots.

SHOP LOCAL


GEORGIA BOOT CARBO-TEC PULL-ON BOOT GB00223

Georgia Boot has built a legacy on manufacturing quality work boots comfortable enough to wear long after your work day ends. The Carbo-Tec LT is now lighter than the original Carbo-Tecs with the same great performance and durability.

Built with a Goodyear Welt construction, the upper on this 11 inch square toe pull on is crafted from soft full-grain leather. It features western stitching with a pop of orange color. Leather pull loops making pulling on this boot a breeze. The heel-stabilizing Counter Lock prevents heel slippage by providing a secure fit. It also acts as a kick off when taking your boots off after a long day.

The inside is lined in high performance mesh. Also inside is a removable Quick Response polyurethane foam insole. It responds to each step and bounces back to cushion as you walk.

The sole on this western work boot consists of a thick cushioning EVA midsole, a fiberglass shank and an oil and slip resistant rubber outsole.

If you’re looking for a lightweight western work boot with one tough sole, you need the Carbo-Tec LT!

Shop Local 


GEORGIA BOOT FARM AND RANCH WELLINGTON WORK BOOT G4432

The Georgia Boot® Farm and Ranch Wellington Work Boot is a durable pull-on boot optimized to resist chemicals and remain comfortable.

This boot is made with  SPR™ leather. Compared to traditional leather,  it is roughly 3 times as strong and resists abrasions 2.5 times as well. SPR™ leather also holds up better than conventional leather against common barnyard and job-site chemicals or acids.

The sole of the men’s work boot is a direct-attached, dual-density, oil-resistant polyurethane “Suspension Wedge” outsole. It resists chemicals, abrasions and oils, while remaining flexible and providing cushion for your feet.

This boot also has a steel shank; steel shanks provide support and protect the arches of your feet when you are using a shovel or climbing a ladder.

A patented Comfort Core insole  adds shock absorption in two key impact zones: the ball of the foot and the heel. It also features a layer of memory foam, so the insole is custom molded to your own foot.

This Georgia Boot is fully lined with breathable moisture-wicking material, so wearing this comfortable work boot is no sweat.

You’ll want to pull on this 11″ boot – easy to do with pull straps. Not only does the Georgia Boot wellington  help you work hard, you’ll look good doing it.

SHOP LOCAL


GEORGIA BOOT CARBO-TEC WELLINGTON G5814

Georgia Boot® Carbo-Tec™ Farm and Ranch pull-on boots have leather that’s superior to the others on the market.The upper is hard-wearing SPR™ leather, a great material for dirty jobs because it’s ready to take on caustic chemicals and common barnyard acids that dry out lesser leathers. SPR™ leather also is very soft and is broken in right out of the box.

Comfortable work boots are important when you work long hours. These 11-inch wellington boots have the patented Comfort Core® insole. It cushions your foot and pushes air through the insole with every step. The fiberglass shank provides arch support.

The Carbo-Tec outsole is highly flexible so you can move with ease. It also resists chemicals, slips and oil.

SHOP LOCAL


GEORGIA BOOT CARBO-TEC LT WATERPROOF PULL-ON WORK BOOT GB00308

The Georgia Boot Carbo-Tec LT Work Wellington is a Farm & Ranch boot built for many long days and pasture environments. The upper is constructed from full-grain SPR leather making it very resistant against caustic chemicals and acids typically found in barnyard environments.

Leather pull tabs allow for easy on of the boot while the Counter Lock system acts as both a heel stabilizer to prevent heel slippage and a protectant against kicking off your boot.

The inside of this waterproof pull on work boot is equipped with high performance lining and the Georgia Waterproof System to keep your feet cool and dry. Additionally, there is a removable Quick Response polyurethane footbed that cushions and absorbs shock as you walk.

The dual density outsole features an EVA midsole and our proprietary rubber blend giving the boots great oil, slip, heat and abrasion resistance. It also includes a fiberglass shank for added stability. This boot meets the ASTM F2892 electrical hazard standards for soft toe work boots.

Built with a Goodyear® welt construction, the Carbo-Tec LT Work Wellington is both incredibly durable and enormously comfortable.

Shop Local 


For Inventory Questions, please call the store at (478)986-9200!